STAFOR ion heating system is only one that have increased rate of energy conversion from electrical to thermal with COP from 1 (100%) to 2.04 (204%), depending on the model of boiler and operation mode. From other manufacturers, this parameter is less than 1. This means that if you use the boiler STAFOR, the electric current makes a greater job and, respectively, heating costs are reduced. By using 1kW of electrical energy STAFOR ion boiler (heater) produces till 2.04kW of heat energy.
Do not overpay for heating! Use high-efficiency boilers STAFOR!

Electrical safety

The original, patented design of the boiler is fundamentally different from the designs of other manufacturers. It enables to use a principle of the separation of working and protective field ("Faraday cell"). To date, it is the only ion (electrode) boiler of a flow type that is entirely consistent with the requirements of the European Community Low Voltage Directive № 73/23/EEC on electrical safety and authorized for sale and use in the EU member states.
Do not expose your life, and lives of other people to danger. Use electrical safety ion boilers STAFOR!
Boilers of other manufacturers can have a dangerous leak of electric current on the body of the boiler!

Quality and reliability

A large margin of safety for materials is incorporated into the ion boiler STAFOR during its design. The use of high-tech alloys and plastics (with heat resistance up to 700°C, with enhanced dielectric properties) provides high quality and reliability of the boiler STAFOR, making it preferable in comparison with other manufacturer’s products. All materials used in the manufacture of the boiler have European quality certificates. Boiler construction and used materials exclude manifestations of destructive processes in the boiler (electrolysis, chemical reactions, etc.), which, unfortunately, some other manufacturers have. Such manifestations may result the premature erosion of the electrodes and other elements of boiler’s design, up to their complete destruction, unstable operation of the boiler, the increased power consumption, lowering COP (coefficient of performance).

Experience in the use of ionic boilers STAFOR indicates that the equipment, used more than 5 years, shows no signs of erosion of electrodes and other elements of the boiler’s construction, the boiler operating parameters are stable. The service life of the ion boiler STAFOR subject to the rules of installation and operation is at least 10 years.

Effective and reliable automation of ion boilers STAFOR, unlike the products of other manufacturers, has protection functions from overload, from misalignment phases of current, failure of one phase of current. It provides stable and energy-efficient boiler operation.

Heat career STATERM EKO E40 used for the ion boiler STAFOR provides a stable ionic composition, stability of electrical parameters of the boiler and high COP.
Do not skimp on quality, use reliable boilers STAFOR!

Universal and adaptable

Original ion heating system STAFOR can be used as main heat source for heating systems with radiators, “heat floors”. It can be used to heat up only hot sanitary water boiler or fan coil unit.

STAFOR ion heating system can be connected and can work together with:

  • Solid fuel boilers,
  • Liquid fuel boilers,
  • Solar collectors,
  • Smart house technology,
  • Photovoltaic systems,
  • Wind generators,
  • All other heating and energy saving systems.